CUT WIRE SHOT 2.0
CUT WIRE SHOT 2.0 suppliers
CUT WIRE SHOT 2.0 factory
CUT WIRE SHOT 2.0 best
CUT WIRE SHOT 2.0 high quality
CUT WIRE SHOT 2.0 price
CUT WIRE SHOT 2.0 factory
CUT WIRE SHOT 2.0 factory

CUT WIRE SHOT 2.0

Steel cutting wire, as the name suggests, steel is its material and pills are its shape, which are mainly divided into two types: cylindrical and spherical. Steel cutting wire are divided into two types from the perspective of old and new. One is old steel wire cut pellets made from recycled steel wire materials. 2.0 mm steel cut wire shot, defined by its extreme impact force and deep surface treatment capability, is purpose-built for the most rugged industrial scenarios—where smaller abrasives (1.2 mm, 1.5 mm) fail to tackle tough contaminants, thick materials, or ultra-high-stress components. Its usage is concentrated in heavy industries requiring rapid processing, deep strengthening, or reliable treatment of large/thick workpieces.

Send Inquiry

Product Introduction

Wire cut shot is an important metal abrasive, widely used in industrial surface treatment and strengthening processes. It is mainly made of waste wire rope through special processing, with high hardness, uniform particle size and long service life. This article will discuss the production process, performance characteristics and application of wire cut shot in various industries.

Steel cut wire shot is a type of abrasive material widely used in industrial surface treatment processes.The 2.0 mm steel cut wire shot is a heavy-duty abrasive engineered for the most demanding industrial surface treatment tasks-where extreme impact force, deep material penetration, or rapid processing of thick/high-strength workpieces is non-negotiable. Its larger diameter (vs. 1.2 mm or 1.5 mm variants) delivers unique advantages that solve pain points smaller abrasives cannot address, making it the go-to choice for rugged applications.

characteristics of 2.0 mM Steel cut wire shot :

1.5 mm steel cut wire shot, characterized by its higher impact force and deep surface treatment capability, is specifically designed for heavy-duty industrial scenarios where robust cleaning, deep strengthening, or efficient processing of thick/high-strength materials is required. Its usage spans industries handling large workpieces, high-stress components, or stubborn contaminants, with applications tailored to solve the limitations of smaller abrasives (e.g., 1.0–1.2 mm shots).

Advantage of 2.0 mM Steel cut wire shot:

1.Extreme Impact Force: Rapid Removal of the Toughest Contaminants

2.Ultra-Deep Compressive Stress: Strengthening Heavy-Duty Load-Bearing Parts

3.Exceptional Durability: Lowest Wear Rate, Highest Reusability

4.Efficient Processing of Large/Thick Workpieces: Batch & Bulk Productivity

5.Controlled Roughness for Heavy-Duty Coatings

6.Compatibility with Ultra-Hard Materials

Usage

1.Strengthening mining/drilling parts that endure extreme impact.
2.Cleaning large marine/offshore structures of thick fouling/coatings.
3.Preparing heavy construction steel for long-term durability.
4.Enhancing power plant components to resist high stress/temperatures.
5.Finishing thick castings in foundries.

Applications

1.Mining & heavy construction: Strengthening drill bits, crusher parts, and crane components.

2.Offshore & shipbuilding: Removing thick fouling/paint from hulls and oil rigs.

3.Power generation: Peening large turbine rotors and descaling boiler tubes.

4.Foundries: Cleaning heavy cast iron/steel parts (engine blocks, valve bodies).

5.Chemical & industrial processing: Texturing tanks for acid-resistant coatings.

Name		wire cutting shot
chemical components	charcoal(C)	0.45～0.75%
	Manganese(Mn)	0.40～1.20%
	silicone(Si)	0.10～0.30%
	sulfur(S)	＜0.04%
	Phosphorus(P)	＜0.04%
even hardness		51～53 HRC(525～561HV) 41～45 HRC(388～436HV)
hardness deviation		max deviation realm±1.0HRC或±40HV
Tensile strength		1750～2150 Mpa 1250～1450 Mpa
metal microstructure		Longitudinal
minum density		7.8g/cm³