For Stone Blasting 2.0
For Stone Blasting 2.0 suppliers
For Stone Blasting 2.0 factory
For Stone Blasting 2.0 best
For Stone Blasting 2.0 high quality
For Stone Blasting 2.0 price
For Stone Blasting 2.0 best
For Stone Blasting 2.0 price

For Stone Blasting 2.0

Cut wire shot is a high-quality, metallic abrasive made by cutting carbon steel or stainless steel wires into precise, cylindrical segments. For stone and concrete surface preparation, the 2.0mm diameter is a robust and efficient size, ideal for heavy-duty cleaning, texturing, and creating a strong anchor profile.

Send Inquiry

Product Introduction

The For stone blasting 2.0mm specification refers to the nominal diameter of the wire used, with the cut length typically equal to its diameter, resulting in a consistent, near-cylindrical pellet. This process yields a highly durable, recyclable abrasive that meets international standards.

2.0mm cut wire shot represents a premium, high-performance abrasive choice for professional stone and concrete blasting. Its primary value proposition lies in efficient material removal, excellent durability, and a clean, controllable finish, making it particularly suited for large-scale restoration, industrial floor preparation, and architectural texturing projects.

The 2.0mm-diameter stainless steel shot-a high-performance abrasive media engineered exclusively for stone blasting applications, ideal for professional stone surface treatment across construction, landscaping, and stone processing industries.

Hardness: Typically 28–32 HRC (balanced to avoid over-damaging stone surfaces while delivering effective cleaning/texturing).

Density: ~7.85 g/cm³ (provides sufficient kinetic energy for efficient blasting without excessive equipment wear).

Advantage of For Stone Blasting 2.0:

1.Controlled Effect: Uniform 2.0mm size prevents uneven etching or excessive material removal on delicate stone.

2.Cost Efficiency: Reusable (up to 100+ cycles, depending on application) to reduce operational expenses.

3.Low Environmental Impact: Minimal dust and debris generation (compared to sandblasting) for cleaner work sites.

4.Durability: Resists corrosion (critical for outdoor/moist stone projects) and maintains shape under repeated use.

Usage

1.Stone fabricators (preparing slabs for installation).

2.Construction contractors (cleaning stone facades or flooring).

3.Landscapers (texturing stone features for safety/esthetics).

Applications

1.Surface Cleaning: Removes contaminants (dust, mortar residues, or weathering layers) from natural stone (marble, granite, limestone) or engineered stone.

2.Texturing/Finishing: Creates desired matte, rough, or uniform textured surfaces (e.g., for anti-slip flooring, decorative stone panels).

3.Surface Preparation: Pre-treats stone surfaces to enhance adhesion for coatings, sealants, or bonding materials.

Parameter Category	Details
Product Name	2.0mm Stone Blasting Shot
Particle Size	Uniform diameter: 2.0mm (coarse-grade, suitable for stone processing)
Common Material	High-carbon cast steel (standard)
Chemical Composition	C: 0.8–1.2%; Mn: 0.6–1.2%; Si ≥0.4%; S ≤0.05%; P ≤0.05%
Hardness Range	Regular: 40–50 HRC; Special grades: 52–60 HRC
Density	~7.2–7.6 g/cm³
Bulk Density	~4.4 g/cm³
Recyclable Service Life	~2000–2800 cycles (steel-based variants)
Core Application	Stone surface texturing, stone carving pre-treatment, stone material cleaning
Key Features	High wear resistance, uniform particle size, strong impact force (ideal for stone processing)