There are many ways to call water knife sand, such as: water knife cutting sand, water knife special sand, water knife machine special sand, garnet sand, garnet sand, Class A water knife sand, Class I water knife sand, universal water knife cutting machine sand, etc. The main mesh numbers are 80 mesh and 120 mesh.
80 mesh water jet sand is the most commonly used water jet sand for general cutting. The cutting speed is usually sacrificed to improve the cutting accuracy. The 80 mesh water jet sand achieves a perfect balance between the cutting speed and the cutting accuracy.
120 mesh water jet sand is mainly used for fine cutting. The cutting speed is slightly slower than 80 mesh water jet sand, but the cutting accuracy is greatly improved. 120 mesh garnet sand is often used for cutting glass.
Garnet water jet sand is a natural mineral. The hardness of garnet sand produced in different regions will also vary greatly. Considering that the processing technology of water jet sand manufacturers is not complete, the quality of water jet sand on the market is obviously different. Poor quality water jet sand will seriously reduce the cutting efficiency, resulting in an increase in time costs and greatly reduce your actual profits. Therefore, the garnet sand supplier must be carefully selected when selecting the raw materials of water jet sand. The actual cutting speed and cutting surface quality of the water jet scalpel are also closely related to the quality of the water jet scalpel sand, such as hardness and purity, and the quality of the water jet scalpel itself.
