CUT WIRE SHOT 0.6
CUT WIRE SHOT 0.6 suppliers
CUT WIRE SHOT 0.6 factory
CUT WIRE SHOT 0.6 best
CUT WIRE SHOT 0.6 high quality
CUT WIRE SHOT 0.6 price
CUT WIRE SHOT 0.6 suppliers
CUT WIRE SHOT 0.6 factory

CUT WIRE SHOT 0.6

Steel cutting wire, as the name suggests, steel is its material and pills are its shape, which are mainly divided into two types: cylindrical and spherical. Steel cutting wire are divided into two types from the perspective of old and new. One is old steel wire cut pellets made from recycled steel wire materials.

Send Inquiry

Product Introduction

Wire cut shot is an important metal abrasive, widely used in industrial surface treatment and strengthening processes. It is mainly made of waste wire rope through special processing, with high hardness, uniform particle size and long service life. This article will discuss the production process, performance characteristics and application of wire cut shot in various industries.

Steel cut wire shot has the following significant characteristics:

High hardness and density: The hardness of steel cut wire shot can reach HRC55 and the density is 7.8 g/cm³, which makes it excellent in impact force and wear resistance.

Uniformity: Due to the standardized production process, the steel cut wire shot is consistent in shape, size and hardness, which helps to achieve better cleaning effect.

Environmental protection: Using waste steel wire rope as raw material not only reduces production costs, but also reduces the generation of industrial waste, which is more environmentally friendly.

Advantage of 0.6mm Steel cut wire shot:

Compared with steel grit, you can get 30% reduction on cost. According to our experince,steel cut wire shot will turn into round shot after long-time use. Bright appearance, no dust and long durability is the advantage of our steel cut wire shot . Bosun Abrasive company is the earliest manufacturer of steel cut wire shot.

Usage

Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, especially used in shot blasting machine and penning machine.
Sand-removing and rust-cleaning of alloy casting, ,surface treatment before plating,cutting rocks,gridding processing,enhancing adhesiveness, intensify of springs, improving roughness,enhacing adhesiveness.

Sand-removing and deoxidization of small sized castings, forgings heat-treated pieces, aluminum copper alloy castings, steel plates, steel pipes, sections and steel structures, surface intensification of springs and chains, cutting of rocks, gridding processing.

1. Ship-building and ship-repariring
2. Coating and corrosion processing of steel structures
3. Railway vehicle coating
4. Preventing corrosion of engineering machiner
5. Preventing corrosion of welded pipes
6. Preventing corrosion of port machinery
7. Coating containers
8. Strengthening surfaces of castings and forgings
9. Intensifying surfaces of polished and sprayed shots
10.Cleaning non-ferrous and stainless steel

Name		wire cutting shot
chemical components	charcoal(C)	0.45～0.75%
	Manganese(Mn)	0.40～1.20%
	silicone(Si)	0.10～0.30%
	sulfur(S)	＜0.04%
	Phosphorus(P)	＜0.04%
even hardness		51～53 HRC(525～561HV) 41～45 HRC(388～436HV)
hardness deviation		max deviation realm±1.0HRC或±40HV
Tensile strength		1750～2150 Mpa 1250～1450 Mpa
metal microstructure		Longitudinal
minum density		7.8g/cm³