CUT WIRE SHOT 0.8
CUT WIRE SHOT 0.8 suppliers
CUT WIRE SHOT 0.8 factory
CUT WIRE SHOT 0.8 best
CUT WIRE SHOT 0.8 high quality
CUT WIRE SHOT 0.8 price
CUT WIRE SHOT 0.8 factory
CUT WIRE SHOT 0.8 suppliers

CUT WIRE SHOT 0.8

Steel cutting wire, as the name suggests, steel is its material and pills are its shape, which are mainly divided into two types: cylindrical and spherical. Steel cutting wire are divided into two types from the perspective of old and new. One is old steel wire cut pellets made from recycled steel wire materials.

Send Inquiry

Product Introduction

Wire cut shot is an important metal abrasive, widely used in industrial surface treatment and strengthening processes. It is mainly made of waste wire rope through special processing, with high hardness, uniform particle size and long service life. This article will discuss the production process, performance characteristics and application of wire cut shot in various industries.

0.8mm steel cut wire shot is a cylindrical abrasive material made by cutting steel wires into precise lengths. The diameter-to-length ratio is typically around 1:1.4, resulting in short, cylindrical segments.

Steel cut wire shot has the following significant characteristics:

High hardness and density: The hardness of steel cut wire shot can reach HRC55 and the density is 7.8 g/cm³, which makes it excellent in impact force and wear resistance.

Uniformity: Due to the standardized production process, the steel cut wire shot is consistent in shape, size and hardness, which helps to achieve better cleaning effect.

Environmental protection: Using waste steel wire rope as raw material not only reduces production costs, but also reduces the generation of industrial waste, which is more environmentally friendly.

Advantage of 0.8mm Steel cut wire shot:

1.High Efficiency and Productivity

2.Exceptional Durability and Long Service Life

3.Low Breakdown Rate and Dust Generation

4.Consistent and Uniform Peening Action

5.Versatility Across Applications and Equipment

6.Environmentally Friendly Choice

7.Metallurgically Clean and contaminant-free

8.Ideal Balance Between Cutting Power and Surface Finish

Usage

Surface Preparation: Where a fine to medium surface profile (Sa 2.5) is required before applying high-quality coatings.

Cleaning: Removing rust and scale from medium-gauge steel sheets, structural components, and castings without excessive pitting.

Descaling: Efficiently removing heat scale from forgings.

Shot Peening: For small to medium-sized components to enhance fatigue life.

Applications

1. Surface Cleaning and Descaling

2. Surface Preparation for Coating and Painting

3.Shot Peening and Surface Strengthening

4.Industrial Sector Applications

5.Specialized Uses

Name		wire cutting shot
chemical components	charcoal(C)	0.45～0.75%
	Manganese(Mn)	0.40～1.20%
	silicone(Si)	0.10～0.30%
	sulfur(S)	＜0.04%
	Phosphorus(P)	＜0.04%
even hardness		51～53 HRC(525～561HV) 41～45 HRC(388～436HV)
hardness deviation		max deviation realm±1.0HRC或±40HV
Tensile strength		1750～2150 Mpa 1250～1450 Mpa
metal microstructure		Longitudinal
minum density		7.8g/cm³